How much does Benjamin Moore Arborcoat deck stain cost in New Brunswick?

Benjamin Moore Arborcoat deck stain typically costs $65-85 per gallon in New Brunswick, with coverage of 150-250 square feet per gallon depending on wood porosity and application method.

Arborcoat is one of the premium deck stain options available at Benjamin Moore dealers across New Brunswick, including locations in Moncton, Saint John, Fredericton, and other major centers. The Arborcoat Semi-Transparent is the most popular choice for NB decks, offering excellent penetration and weather protection while allowing the wood grain to show through.

Coverage and project costs vary significantly based on your deck's condition. A new pressure-treated deck that's properly dried (3-6 months after installation) will absorb more stain, requiring closer to one gallon per 150 square feet. An older deck that's been previously stained may only need one gallon per 250 square feet. For a typical 12x16 deck (192 square feet), expect to purchase 1-2 gallons, putting your stain cost at $65-170 before application supplies.

New Brunswick's Maritime climate makes stain quality crucial. Arborcoat's alkyd-oil formula penetrates deeply into wood fibers, providing better protection against our frequent freeze-thaw cycles and high humidity levels. The stain forms a protective barrier that helps prevent moisture from entering the wood grain, where it would freeze and cause splitting during our harsh winters.

Application timing is critical in New Brunswick. Arborcoat should only be applied when temperatures will remain above 10°C for at least 48 hours after application, typically mid-May through September. Avoid staining before rain or during high humidity periods, as this prevents proper penetration and curing.

Professional application typically adds $3-6 per square foot to your total project cost, including power washing, prep work, and stain application. Many homeowners find this worthwhile given the importance of proper surface preparation and even application for maximum stain life in our challenging climate.

For the best results with Arborcoat in New Brunswick's climate, plan to reapply every 2-3 years on horizontal surfaces and 3-4 years on vertical railings. The investment in quality stain like Arborcoat often pays for itself through extended protection and reduced maintenance frequency compared to budget alternatives.

Need help finding a deck builder for staining or deck construction? New Brunswick Decks can match you with experienced local contractors who understand proper stain application techniques for our Maritime climate.